您现在的位置:饲料事业 >> 饲料机械 >> SCPH系列单轴膨化机 >> SCPH系列单轴膨化机
饲料事业

SCPH系列单轴膨化机

SCPH Uniaxial Extruder

  • 产品名称: SCPH系列单轴膨化机

性能特点/Features:

1.适应于各种高中低档、大小颗粒、沉浮性和慢沉性鱼虾饲料;
2.颗粒外观整齐均匀,耐水性好,适应模具孔径范围∅0.6mm-20mm;
3.圆盘破拱器—立式齿轮减速机带动破拱装置;
4.变频喂料器—防蒸汽逆流密封管式设计,配检查门,透气孔;
5.双轴差速调质机—不锈钢实心双轴,激光切割叶片精度高,齿轮减速箱传动;双边六开门易清理;
6.膨化主机—精铸轴承座,数控镗床加工;六方形高铬合金钢轴,耐疲劳寿命长;德国FAG轴承,进口油封和密封绳防漏料漏油;特殊合金钢材质螺旋内套,耐磨损更换方便;
7.变频切刀系统—申川独有切刀系统,有利于出料切口平整;少螺栓设计,易拆装;铰链式结构轻松方便,利于加
装密度控制器;


1.It is suitable for all kinds of fish feed of different level, different particle size, sinking and floating and slowly floating.
2.Particle uniformity, good water resistance, suitable for the mold aperture range of ∅0.6mm-20mm;
3.Disk arch-breaking device—vertical gear reducer drives the arch-breaking device;
4.Frequency feeder—steam-proof countercurrent and sealed tubular design, supplied access door and breather;
5.Biaxial differential tempering machine—stainless steel solid shaft, laser cutting blades with high accuracy, gear reducer; the bilateral six open doors is easy to clean;
6.Expanded host-casting axle-bearing, NC boring machine; hexagonal high chromium alloy steel shaft, fatigue resistance, long service life, Germany FAG bearings, imported oil seal cord and sealing cord can prevent material and oil from leaking; screw in the application set which features in wear resistance and makes the replacement more convenient.
7.Shenchuan's unique cutting knife system of the variable frequency is good for cutting gate of material discharge, the few bolt design makes it easy to dismounting; the convenient hinge structure is good for the installation of density controller;
 

设备技术参数/Specifications:

型号
Model
主电机功率
Main motor power(KW)
进料口宽度
Feed inlet size(MM)
产量
Yield(T/H)
SCPH-105 22-30 ∅105 0.5-1.0
SCPH-115 55-75 ∅115 1.5-2.0
SCPH-135 90-110 ∅135 2.5-3.5
SCPH-165 132-160 ∅165 4.0-6.0
SCPH-215 220-315 ∅215 7.0-10.0
SCPH-265 355-450 ∅265 12.0-15.0

注:以上产量以原料超微粉碎95%通过80目,标准罗非鱼配方、∅4.0mm钢模测量得出。
Note:  95% of the crushing of raw material has passed 80 meshes, standard tilapia formulation, the output can be measured by ∅4.0mm steel mold.