您现在的位置:饲料事业 >> 饲料机械 >> SCPH系列双轴膨化机 >> SCPH系列双轴膨化机
饲料事业

SCPH系列双轴膨化机

SCPH Biaxial Extruder

  • 产品名称: SCPH系列双轴膨化机

性能特点/Features:

1.适应于各种高中低档、大小颗粒、沉浮性和慢沉性鱼虾饲料;
2.颗粒外观整齐均匀,耐水性好,适应模具孔径范围∅0.5mm-20mm;
3.圆盘破拱器—立式齿轮减速机带动破拱装置;
4.变频喂料器—防蒸汽逆流密封管式设计,配检查门,透气孔;
5.双轴差速调质机—铬钢实心双轴,激光切割叶片精度高 齿轮减速箱传动,双边六开门易清理;
6.膨化主机—整装减速机配置,电机直轴联轴器传动,高可靠性和高寿命;双六方形轴,同向转动,对物料切割揉搓好;特殊合金钢材质螺旋内套,耐磨损更换方便;
7.相对于单轴膨化机有更均匀的颗粒外观和更大的配方适应范围,有更高的内含油脂适应性;
8.变频切刀系统—申川独有切刀系统,有利于出料切口平整;少螺栓设计,易拆装;铰链式结构轻松方便,利于加装密度控制器。


1.It is suitable for all kinds of fish feed of different level, different particle size, sinking and floating and slowly floating;
2.Particle uniformity, good water resistance, suitable for the mold aperture range of ∅0.5mm-20mm;
3.Disk arch-breaking device-vertical gear reducer drives the arch-breaking device;
4.Frequency feeder-steam-proof countercurrent and sealed tubular design, supplied access door and breather.
5.Biaxial differential tempering machine-chromium steel solid shaft, laser cutting blades with high accuracy, gear reducer; the bilateral six open door is easy to clean.
6.Extruder main engine-self-contained gear reducer, motor shaft coupling transmission, high reliability and long service life, double hexagon shaft, the same rotation, good material cutting, special alloy steel spiral inner lining, wear resistance, easy to  replace.
7.Compared with the uniaxial extruder, there are more particle uniformity ,bigger scope of  formulation and higher adaptability  of oil in this biaxial extruder.
8.Shenchuan’s unique cutting knife system of the variable frequency is good for cutting of material output, the few bolt design makes it easy to dismounting; the convenient hinge structure is good for the installation of density controller.
 

设备技术参数/Specifications:

型号
Model
主电机功率(KW)
Power
螺旋直径(MM)
Spiral Diameter
浮料产量(T/H)
Floating Feed Output
SCPH-100X2Y 55-75 ∅100X2 1.0-2.5
SCPH-125X2 110-160 ∅125X2 3.0-6.0
SCPH-150X2 250-315 ∅150X2 8.0-12.0
SCPH-175X2 355-450 ∅175X2 12.0-15.0

注:以上产量以原料超微粉碎95%通过80目,标准罗非鱼配方、∅4.0mm钢模测量得出。
Note:  95% of the crushing of raw material has passed 80 meshes, standard tilapia formulation, the output can be measured by ∅4.0mm steel mold.